Nissan ECU Tuning

raddy · Joined: 29 Nov 2005 Posts: 95

Hi all

Im looking for tuned VG30ET bin (Z31 manual, turbo, ´88 ) for following configuration:

Garrett GT35R,compressor trim56, turbine trim 84, turbine A/R .82
boost pressure 1.5bar
estimated power about 450-500hp at flywheel
440cc injectors (RC Engineering, high impedance)
Z32TT AFM

What I need is base tune to suit above turbo (especially correct TP scale to suit boost up to 1.5bar) to help me begin with fine tuning by wideband lambda. Will be nice to tune also AFM and injectors, but this I can do by myself if neccessary.

my email: pastucha@egamed.sk

Thank you for you help

P.S. I can offer as exchange value very well tuned ca18det bin for Garrett T3 turbo, 444cc injectors and RB20DET AFM (or other AFM type or injectors size), good up to 1.3bar of boost and about 320hp.

raddy · Joined: 29 Nov 2005 Posts: 95

nobody?

rev-speed · Joined: 01 Feb 2007 Posts: 15

first off 440 cc s r way too small to support that turbo
i made on a stock s-14 280whp on stock turbo wtih 12-13 psi of boost.........

raddy · Joined: 29 Nov 2005 Posts: 95

it is VG30ET engine, where are 440cc injectors good for more than 450whp.....

bump

Greedy · Joined: 05 Nov 2007 Posts: 9

i have .bin file for vg30det with boost cut removed some fuel changes rev limiter moved up to 7800 and no speed cut.

raddy · Joined: 29 Nov 2005 Posts: 95

thanks for offer. in the meantime I found and adapt requested bin file.