| View previous topic :: View next topic |
| Author |
Message |
ShermanBG
Joined: 23 Feb 2008
Posts: 2
|
 Posted: Sat Feb 23, 2008 5:27 pm Post subject: CA18DET stalls when trying to rev it |
 |
|
Hallo guys
I have 200SX (manual transmission; with lambda sensor) with CA18DET engine. I want to go from stege 2 to stage 3 and I bought 550cc injectors from www.deatschwerks.com and Z32 twin turbo AFM.
I have stage 3 chip for 444 injector and with Live Edit software I made new bin for 550cc...the car starts and idles well but when I press even slightly the accelerator pedal the engine tries to stall...then I made more than 30 different bins with different injector size and null time...some of them I used as a base 2 different stage 3 bins and the stock bin...there is only slight difference when I put the max allowed value "99" for null time. Then I can rev the engine higher when I press the accelerator very gradually and slightly but even at 5k rpm when I press it harder the engine tries to stall...
Can somebody help me?
Sorry for the bad English  |
|
| Back to top |
|
 |
twin-turboz
Joined: 26 Nov 2003
Posts: 62
|
| Posted: Tue Feb 26, 2008 8:59 pm Post subject: |
|
|
Sounds like you have not adjusted correctly for the twin turbo MAF
Pm me and i will try try to help you
Rune |
|
| Back to top |
|
|
ShermanBG
Joined: 23 Feb 2008
Posts: 2
|
| Posted: Sun Mar 02, 2008 8:50 pm Post subject: |
|
|
My AFM was not working properly 
that's caused my problems |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
